BKQPB - ABLEBOND 933-2
- MSDS: BKQPB
- Manufacturer: ABLESTIK LABORATORIES
- Product Name: ABLEBOND 933-2
- National Stock Number: 8040-00N016431
Product Identification
Product ID:ABLEBOND 933-2
MSDS Date:02/12/1988
FSC:8040
NIIN:00N016431
MSDS Number: BKQPB
Responsible Party
RANCHO DOMINGUEZ, CA 90221
US
Emergency Phone: 213-764-4600
Info Phone: 213-764-4600
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
EPOXY RESIN (BISPHENOL A LIQUID EPOXY RESIN)
CAS: 25068-38-6
RTECS: KC2100000
BUTANE,1,4-BIS (2,3-EPOXYPROPOXY)- (DIEPOXIDE REACTIVE
CAS: 2425-79-8
RTECS: EJ5100000
Hazards
LD50 LC50 Mixture:LD50:(ORAL RAT)1,410 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:HEATED PRODUCT MAY PRODUCE
INHALABLE VAPORS. MAY BE HARMFUL IF INHALED. SKIN:CAN CAUSE
IRRITATION/SENSITIZATION. HARMFUL IF ABSORBED THROUGH SKIN.
EYE:EXTREMELY IRRITATING. INGEST: INFORMATION I S NOT AVAILABLE,
HOWEVER, MODERATE POTENTIAL FOR ORAL TOXCITY IS EXPECTED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH W/WATER FOR AT LEAST 15 MINS. SEEK MEDICAL
ATTENTION. SKIN:WASH IMMEDIATELY W/SOAP & WATER. IF IRRITATION
PERSISTS, SEEK MEDICAL ATTENTION IMMEDIATELY. INHAL:REMOVE TO FRESH
AIR IMMEDIATELY. INGEST:SEEK MEDICAL ATTENTION IMMEDIATELY.
Fire Fighting
Flash Point Method:CC
Flash Point:>280F,>138C
Extinguishing Media:CARBON DIOXIDE, FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:WIPE UP W/SOLVENT SATURATED TOWELING AND
COLLECT IN AN APPROPRIATE CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE REFRIGERATED AT ALL TIMES.
PRODUCT SHOULD BE USE W/CAUTION UPON CURING.
Other Precautions:PROTECTIVE MEASURES DURING MAINTENANCE OF CONTAMD
EQUIP: AVOID CONTACT W/EYES, SKIN AND CLOTHING. AVOID INHALATION OF
VAPORS. GOOD HOUSEKEEPING IS REQUIRED.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
IF NEEDED.
Ventilation:USE ADEQUATE VENTILATION. LOCAL EXHAUST IS RECOMMENDED WHEN
APPROPRIATE TO CONTROL EMPLOYEE'S EXPOSURE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE EQUIPMENT TO COVER EXPOSED AREAS.
Work Hygienic Practices:VENT CURING OVEN TO OUTDOORS.
Supplemental Safety and Health
CNDTNS (POLYM): BE USED W/CAUTION UPON CURING. VENT CURING OVEN TO
OUTDOORS.
Chemical Properties
HCC:T6
Boiling Pt:B.P. Text:>392F,>200C
Spec Gravity:2.3
Solubility in Water:NIL
Appearance and Odor:BLACK, NON-FLOWING PASTE; MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT PRIOR TO CURE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
ALDEHYDES.
Conditions to Avoid Polymerization:EXCESSIVE HEAT. IF THIS PROD IS NOT
FOR THIN BOND LINE APPLICATN, VIOLENT CHEM RXN CAN RSLT. PROD
SHOULD (SEE SUPP DATA)
Disposal
Waste Disposal Methods:DISPOSE IN APPROVED CHEMICAL DISPOSAL AREA OR IN
A MANNER WHICH COMPLIES W/ALL LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.